Veteran Coins

These Remembrance pins come custom engraved with two bars.

The intent is to provide a wearable pin with the name of the fallen warrior's name on it with a second bar to provide for a short message to personalize it with.

The way that this came about was a lot of people were buying a Veteran Coin for a former soldier who had passed away or, a husband or daughter who were deployed so, I thought that a dedicated coin would be the answer and began working on that (and actually have one which I will reveal in a month or so.

In the meantime, I came up with this idea to make an engravable pin which can be worn to remember an individual or two. They are 2 inches high and an inch and a half wide. So, will fit nice on a blazer. Or leather biker jacket lol.



“Drew just received my coin and pins. You Sir have done a fantastic job. I am completely Pleased with the coin and Pins. The weight was a nice surprise. Thank you.” ~ JP

I received a message from a customer asking if I had a way to have twenty names put on a pin. I said I didn’t and played with the idea of making a chain of engraving bars however, my engraver said it would be a pain in the ass dealing with dozens of the little things and then trying to fix them onto the pin like a ‘Barrel of Monkeys’ as they came off whilst on parade so, I gave up on the idea.

A couple days later it came to me and this is the result, five of the same size bars that can work perfectly with the Remembrance Pin or the Veteran Pin, depending on how many names you need - remembering of course that you can add in phrases of “Lest We Forget’ etc.

REMEMBRANCE AND ANCILLARY PIN


$55

The two pins together seems a natural fit so they can be sold together as shown above.

And it works well with the Veteran Pin acting as a Remembrance Pin sans engraving bar as well if the numbers add up for you.

“Drew these coins are unbelievably beautiful great job.” ~ DL

VETERAN AND ANCILLARY PIN COMBO


$35

This adds a bit of versatility for space and numbers as those two factors can be a problem. One of my customers had three names, one too many for the Remembrance Pin and two too little for the ancillary and, not enough room for both anyhow.

So he came up with this solution – to use the smaller Veteran Pin as the head and the Ancillary Pin as the info and simply use two of the bars not for names but rather mottos such as ‘REMEMBER’ & ‘LEST WE FORGET.’



If that isn't enough then there is an ancillary pin with five bars for $25 which also comes custom engraved.

The REMEMBRANCE PINS are also 3 dimensional and made of die stamped zinc with an antique silver finish. They’re 1 ½ inches wide and 2 inches high and have two engraving bars which can comfortably accept 20 characters for names or a motto.

These are $35 engraved. The ANCILLARY PIN is 1 inch wide and 1 ½ inch high and made of the same high quality material and are $25 engraved.